MPPT Controller 100A – 200V 12/24/36/48V


EPEVER MPPT Controller 100A – 200V 12/24/36/48V

SKU: TRACER10420AN-100AMP Category:


This series of controllers can effectively prolong the life-cycle of batteries, significantly improving the systems performance. The load, utility or generator auto-control relays make it ideal to use with a solar power system and backup generator. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection this effectively ensure a safe and reliable solar system. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customers to expand the control parameters. Up to 8 controllers can be in linked in parallel for synchronised charging to meet future system expansions and monitoring requirements.


  • CE certification (LVD EN/IEC62109,EMC EN61000-6-1/3).
  • High quality & low failure rate components of ST and Infineon to ensure the product’s life.
  • Advanced MPPT technology & ultra-fast tracking speed, with tracking efficiency no less than 99.5%.
  • Maximum DC/DC transfer efficiency is as high as 98.6%, full load efficiency is up to 98%.
  • Advanced MPPT control algorithm will minimise the MPP loss rate and loss time.
  • The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP.
  • The wider range of MPP operating voltage.
  • Auto control system to limit the charging power & current go over the rated value.
  • Support 4 charging options: Sealed, Gel, Flooded and User.
  • Battery temperature compensation function.
  • Real-time energy recording and statistical function.
  • Automatic over-temperature power reduction function.
  • Hundred percent full load operation in working environment temperature range within charging & discharging
  • Support up to 8 units in parallel to expand system
  • Load relay control external load switch signal to realise diversified load work modes
  • The first and the second disconnection of load control, contain two relay’s contact.
  • Auto-control of utility and generator relay design
  • Utility or generator auto-control relays make it easy to compose the hybrid power system
  • The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
  • Isolated RS485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
  • To monitor or set the parameters by using the phone Apps or PC software.



  • Nominal System Voltage: 12/24/36/48VDC or Auto
  • Battery Input Voltage Range: 8V~68V
  • Battery Type: Sealed(Default)/Gel/Flooded/User
  • Max Rated Charging Current: 100 amps
  • Max Rated Charge Power: 1250W/12V – 2500W/24V – 3750W/36V – 5000W/48V
  • Max. PV Array Power: 1875W/12V – 3750W/24V – 5625W/36V – 7500W/48V
  • Max Input Voltage: 200Vdc
  • Max. conversion efficiency: 98.6%
  • Full load efficiency: 98%
  • Tracking efficiency: ≥99.5%
  • Self Consumption: 98mA/12V;60mA/24V;50mA/36V;46mA/48V
  • Grounding: Common negative grounding
  • Relay: Rated Value:5A/30VDC; Max. Value:0.5A/60VDC
  • Ambient temperature range: -25℃~+60℃ (Derate above 45℃)
  • Enclosure: IP20

Dimensions: 394×242×143mm

Weight: 7.4kg